Sunrise Door and Home Software Monday October 23, 2017  





LEGENDS OF 'OLE 16-Bit Documentation

Download PDF Version

Version 2.1
Author/Contact Al Lawrence/Sunrise Door Software
Overview Legends of 'Ole is a true Multinode, RPG adventure style door game that will have your users coming back for more and more each day!
Installation (1) Create a directory to hold all files
(2) Unzip the archive into the above directory
(3)Run LOOxx.EXE and it will automatically create the subdirectories it needs to operate
(4) Create a batch file or modify the batch file supplied. An example description of this file follows:

ECHO off
cd\PCB\DOORS\ACEY       Location of ACEY files
ACEY ACEY.CFG        filename and CFG filename (Name used in creating file in #3 above)
CD\PCB
BOARD

(4) When running in more than one node, be sure to supply a different configuration name for each node (your choice of name).

(5) If running with Fossil-based multi-port boards add /FD to the line containing the CFG name in the following example:

ACEY ACEY.CFG /FD

(6) Create a configuration file, with a name of your choice, or modify the supplied CFG file. A description follows:
 

CONFIGURATION FILE

# = Requires registration to change to a different value.


NOTE: There are NO Blank Lines in the Config File!!
** Location of system file (See Below)
SUNRISE BBS Your BBS name
Al Sysop's First name
Lawrence Sysop's Last name
1
1
Comm Port \     These 2 lines are required
       Node # /     ONLY for GTUSER.BBS
00000000 Registration Number
1 Adopt-A-Door
1=Do not display message to callers
2=Display Message only if you have created an Adopt.SYS file. See below!

** Replace with ONE of the following:

C:\bbs\PCBOARD.SYS         <- For PCBoard systems using PCBOARD.SYS only
C:\BBS\CALLINFO.BBS         <- For Wildcat! systems (prior to v3.0)
C:\BBS\DOOR.SYS              <- For ANY systems that support DOOR.SYS
C:\BBS\DORINFOx.DEF        <- For ANY systems that support DORINFOx.DEF
C:\BBS\SFDOORS.DAT        <- For Spitfire systems.
c:\bbs\TRIBBS.SYS             <- For TriBBS systems.
C:\BBS\GTUSER.BBS           <- For GT Power     * if using this option you must put the
                                                                         ComPort # on line 5 and the Node # on
                                                                         line 6 of the configuration file

Maintenance Add a call to LOOMAINT.EXE in your nightly event batch file. LOOMAINT.EXE NEEDS to be called once a night to perform maintenance. LOOMAINT must be in the LOO directory!

LOOMAINT /M
Troubleshooting (1) If you are running this Door on a 486 system and encounter errors such as

ERROR 6.... OVERFLOW Error
ERROR 5.... ILLEGAL Function Call (may be associated with other problems)
KEYBOARD Timeout after 5 minutes

You may have to put the following line in your AUTOEXEC.BAT file:

SET NO87=ON

(2) If you encounter an Error 62 (Input Past End of File), BEFORE you see the opening screen of the Door, your problem will more than likely be associated with the CFG file. The error 62 means that you do not have enough entries in the CFG. Compare your CFG file with the CFG definition in the DOC file.

(3) If you encounter an ERROR 70... Permission Denied, this will more than likely mean that you DO NOT have SHARE loaded. SHARE is a DOS file that comes with your version of DOS. To load it type the word SHARE at the DOS prompt. To load it permanently type the word SHARE on a line by itself in your AUTOEXEC.BAT file, any place prior to the loading of your BBS
software. There have been numerous reports that loading SHARE high causes some problems, so to be on the safe side, do not load it high.
Adopt-A-Door Having been a Sysop for a number of years, I have had my share of problems and frustrations getting financial support for my board's upkeep. A fellow Sysop left a message on my board, not long ago, about a concept that was being used by several boards around the country.

The concept, ADOPT-A-DOOR, allows a caller to register (ADOPT) a door. It would be the same as sending in a donation, only this way it is earmarked for registering a particular door. In a way, the user feels he/she is "getting something in return". As a Door author I have decided to build this concept into each of my Door programs. The concept replaces the usual message "tell the Sysop to register this Door" we find in most doors.

If the Door is unregistered then a message appears on the opening screen to that effect. After finishing or suspending a game, a message screen is displayed about the ADOPT-A-DOOR concept. The message also tells the caller to contact the Sysop to find out if there is any further details to the ADOPT-A-DOOR concept. Some Sysops give extra D/L time, online time, etc to callers that ADOPT-A-DOOR.

If the Door has been registered, either by the Sysop or other callers, the names of those contributors will be displayed in the closing screen.

NOTE: If you want to display the names of the callers that contributed to registering the Door, you must create an ASCII file called
ADOPT.SYS. You create it with an Editor or Word Processor. Enter the name(s) of the contributors (one on each line, maximum of 5
entries, each a maximum of 30 characters long). This file must be saved, in ASCII format, and placed in the Door directory.
 
Non-Standard COM
Support
Support for COM 1-4 on the standard IRQ's - COM1/COM3 = IRQ4 and COM2/COM4 = IRQ3. If you wish to use a non-standard IRQ, add the IRQ number after the configuration filename. Let's assume your Door is called FOOBAR and you want to use COM1 and IRQ5. The command line passed to your Door would
be:

FOOBAR FOOBAR.CFG /5

The /5 tells FOOBAR to use IRQ5 rather than the standard IRQ4 that is normally used with COM1. No /x parameter is needed for the standard IRQ's.

As an alternative, you may use an environmental variable on the command line. To use the variable (following the example above), place a SET IRQ=5 in the batch file used to bring up your BBS (you would need a different IRQ number for each node). The command line would now look like this:

FOOBAR FOOBAR.CFG /%IRQ%

This, in combination with the use of the environmental variables described in the MULTI-NODE SETUP section will allow you to use one batch file and one configuration file to run this door on all nodes.
 
Multi-Node Setup All Sunrise Doors are Multi-Node capable. Each node must have the ability to access a Configuration file which will have its own system file (DORINFOx.DEF, PCBOARD.SYS, DOOR.SYS, etc) defined on the first line. There are 2 ways to accomplish this:

(1) Create a separate configuration file for each node. The only difference between each file would be the location of the system
file for that particular node. For example, on my system there are 2 nodes and the first line of the Configuration files would look like this:

NODE1: H:\PCB1\DOOR.SYS
NODE2: H:\PCB2\DOOR.SYS

Thus, if you have a 4 node BBS, you will need 4 configuration files.

(2) Use ONE configuration file for ALL nodes. This Door will recognize the following PCBoard/Wildcat environmental variables:

PCBDIR (Directory containing the System file)
PCBDRIVE (Drive containing the System file)
WCNODEID (Active Node Number)

Thus, the first line of the SINGLE configuration file, for this Door would look like this:

%PCBDRIVE%%PCBDIR%\DOOR.SYS
c:\wc30\wcwork\node%wcnodeid%\door.sys

NOTE: This option, as described, assumes that you are running PCB or Wildcat software. The environmental variables are automatically created by the software for each node.

HOWEVER, if you are running other BBS software you should be able to set the variables EXACTLY as described below, for EACH node (more than likely in each batch file you use to bring up EACH node):

PCBDRIVE=C:
^^^^^^^^^
PCBDIR=\NODE2
^^^^^^^^

Info with a carat (^) under it, MUST be typed as is. The rest depends on your naming conventions.

This, in combination with the use of the optional environmental variable described in the NON-STANDARD COM SUPPORT section, will allow you to use one batch file and one Configuration file to run this door on all nodes.
Adopt-A-Door The concept, ADOPT-A-DOOR, allows a caller to register (ADOPT) a door. It would be the same as sending in a donation, only this way it is earmarked for registering a particular door. In a way, the user feels he/she is "getting something in return". As a Door author I have decided to build this concept into each of my Door programs. The concept replaces the usual message "tell the Sysop to register this Door" we find in most
doors.

If the Door is unregistered then a message appears on the opening screen to that effect. After finishing or suspending a game, a message screen is displayed about the ADOPT-A-DOOR concept. The message also tells the caller to contact the Sysop to find out if there is any further details to the ADOPT-A-DOOR concept. Some Sysops give extra D/L time, online time, etc to callers that ADOPT-A-DOOR.

If the Door has been registered, either by the Sysop or other callers, the names of those contributors will be displayed in the closing screen.

NOTE: If you want to display the names of the callers that contributed to registering the Door, you must create an ASCII file called ADOPT.SYS. You create it with an ASCII text editor. Enter the names of the contributors (one on each line, maximum of 5 entries, each a maximum of 30 characters long). This file must be saved, in ASCII format, and placed in the Door directory.
Legalities THIS SOFTWARE AND ACCOMPANYING MATERIALS ARE DISTRIBUTED "AS IS" WITHOUT WARRANTY, EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ANYONE INVOLVED WITH THE CREATION AND PRODUCTION OF THIS PRODUCT BE LIABLE FOR INDIRECT, SPECIAL, OR CONSEQUENTIAL DAMAGES, ARISING OUT OF ANY USE THEREOF OR BREACH OF ANY WARRANTY.
Distribution You may make this file available for downloading from your BBS or you may upload it to any BBS or WEB site of your choice, provided that you do not make any changes to the contents of the archive (ZIP/EXE file). The archive and its individual contents may not be used by any service that charges any money whatsoever, without the written permission of the author.
Registration Registration and the subsequent insertion of the registration number into your configuration file, allows for the display of your BBS name on the opening and closing screen as well as the reduction of a delay built into the opening screen display along with the ability to change certain values in the configuration file.

Once a door is registered, any changes to registration information (Sysop name or BBS Name) will require the doors to be re-registered at the registration fee in effect at that time.

Be sure to use the proper upper/lower case when filling in your name and BBS name, as they MUST match the way you entered them in the configuration file.
Misc. The latest version this product, along with and other fine DOOR and HOME EDITION products are always available for download from this web site.


Moving Eye Line

Moving Eye Line


Last modified: August 11, 2013        Valid XHTML 1.0 Transitional